:: Forums ›

Deprecated: Assigning the return value of new by reference is deprecated in /home/idealogi/public_html/malatbimmer.com/evolution/includes/db/db.php on line 379
:: Forums › Spacers...

-> Car Talks & Chit Chat

#1: Spacers... Author: PaaN404040, Location: Putrajaya

Posted: Sun Aug 30, 2009 5:00 pm
----
hai...
nk tanye...
ada ker spacer dari 4 hole ke 5 hole??
bole taw brape harga nya??
n kite punya rim tuh mmg pkai bolt ea
x mcm kete laen pkai nut??
btul kn sy if ada salah..

#2: Re: Spacers... Author: chriseunos,

Posted: Sun Aug 30, 2009 7:01 pm
----
from my experience, its better not to use spacer. It will cause vibration to the car.

Spend the extra money to get a proper bmw e30 rims. Its worth it.

IF you insist on using 5 hole PCD120 bmw rims. Do the 5 lug conversion and do it properly, do it once, do it right. Less headache

IF you again insist on using spacers, get a properly made spacers and dont cheap out on it.

Chris

#3: Re: Spacers... Author: al3dx, Location: Kota Kinabalu, Sabah

Posted: Sun Aug 30, 2009 7:42 pm
----
I agree 100% on what Chris said...

#4: Re: Spacers... Author: jeembo, Location: Car_Junk

Posted: Sun Aug 30, 2009 8:32 pm
----
can ask me maaa...kekekkeke....my Agong E30 is running on the 4 lugs to 5 lugs spacers. i nvr had any vibration issue. i spent 1.4K for the spacers and its a forever warranty hehehehe....no probs at all!

#5: Re: Spacers... Author: eau-rouge, Location: Ampang

Posted: Sun Aug 30, 2009 9:59 pm
----
me using spacers too..but 4 lugs
no vibration whatsoever
fabricate your own instead of buying aftermarket ones

#6: Re: Spacers... Author: boy_mtech, Location: Selangor

Posted: Tue Sep 01, 2009 6:30 am
----
Last time asking for spacer cost bout RM760 bro..
190/pcs.Better make a 5lugs conversion.Coz afraid if u r "kaki rembat" then the spacer will broken.Hehehehe... yeke bro jem? Agak² je ni..

#7: Re: Spacers... Author: jeembo, Location: Car_Junk

Posted: Tue Sep 01, 2009 8:24 am
----
my spacers can handle 2000KG pressure wooo...fully tested:)

#8: Re: Spacers... Author: kura2,

Posted: Tue Sep 01, 2009 1:54 pm
----
wow, can angkat 2 lori!

#9: Re: Spacers... Author: boy_mtech, Location: Selangor

Posted: Tue Sep 01, 2009 11:05 pm
----
Then strict to wheel spacer la.more cheaper then conversion.Hehehehe..

#10: Re: Spacers... Author: kura2,

Posted: Sat Sep 05, 2009 6:02 am
----
Saw this e34 rim in mudah, kinda ok to me, spacer or drill 4 hole?

www.mudah.my/BMW-Rim-E...501901.htm

bro PaaN404040, sorry hijack ur thred hehehe

#11: Re: Spacers... Author: highwaystar, Location: Kola Lompuer

Posted: Sun Sep 06, 2009 9:48 am
----

kura2 wrote:

Saw this e34 rim in mudah, kinda ok to me, spacer or drill 4 hole?

www.mudah.my/BMW-Rim-E...501901.htm

bro PaaN404040, sorry hijack ur thred hehehe

dont do it. you can drill to fit ONLY 318 E30, 318 single disc so caliper small, 320 vented caliper big. It will touch your inner side of the rim. Even if you shave the caliper..masih tak boleh. in the end still have to use spacer. oops unless you want to use spacer larr.

Okay i see the price for the rim is RM580, Spacer berapa? total with new set of tyres? suggest you to save extra money and get the correct rim.

been there done that.

Cheers!

PaaN404040 sorry hijack.

#12: Re: Spacers... Author: kura2,

Posted: Mon Sep 07, 2009 3:32 am
----
hehehe, that's why i ask here, SPOT ON answer based on experience Smile

#13: Re: Spacers... Author: PaaN404040, Location: Putrajaya

Posted: Sun Sep 13, 2009 6:18 pm
----
wow...
pening nyer cm nih...
sy nk tuka coz ada mmbr da racun...
BMW E30 use bolt...
so die ckp tuka la pkai 5 hole nyer...
nnt bolt thn lama...
kalo 4 hole die ckp bolt x thn nnt patah dlm lagi susah...
tetambah da konvert RB20...
kick die laen mcm...

#14: Re: Spacers... Author: boy_mtech, Location: Selangor

Posted: Mon Sep 14, 2009 12:44 am
----
Pegi kedai halfcut cari trailing arm ti je.. tu PCD 120.Kalo xnk beli spacer 4lugs kepada 5 lugs PCD 114.Janji duit ada.

#15: Re: Spacers... Author: evilnickwong, Location: TTDI, KL

Posted: Mon Sep 14, 2009 12:49 am
----
If you do not intend to change to 5-lug properly, then save up and get a good set of E30-specific rims.

If you use spacers, good quality ones are expensive, then you have to factor in the cost for longer lug nuts as well. Also, PCD converting spacers are quite thick, and will add unsprung weight to all 4 corners, decreasing performance. After all the cost + disadvantage, you might as well get proper rims. Razz

Just me 2 cents opinion. Wink

#16: Re: Spacers... Author: kura2,

Posted: Mon Sep 14, 2009 1:30 pm
----

evilnickwong wrote:

If you do not intend to change to 5-lug properly, then save up and get a good set of E30-specific rims.

If you use spacers, good quality ones are expensive, then you have to factor in the cost for longer lug nuts as well. Also, PCD converting spacers are quite thick, and will add unsprung weight to all 4 corners, decreasing performance. After all the cost + disadvantage, you might as well get proper rims. Razz

Just me 2 cents opinion. Wink

i disagree....on the 2 cents part.

#17: Re: Spacers... Author: PaaN404040, Location: Putrajaya

Posted: Thu Sep 17, 2009 4:47 pm
----
tp offset brape yg plg cun skali???
looks garang at E30??

#18: Re: Spacers... Author: chriseunos,

Posted: Wed Sep 23, 2009 6:01 am
----
0 offset xD

#19: Re: Spacers... Author: PaaN404040, Location: Putrajaya

Posted: Thu Sep 24, 2009 10:21 pm
----
huhuhu...
so about 4 lug n 5 lug...
e30 bole pkai yg 5 lug e34 x??
1 set...
include disc...
or alternative way??

#20: Re: Spacers... Author: boy_mtech, Location: Selangor

Posted: Fri Sep 25, 2009 7:27 am
----
boleh pakai rotor e34 tapi customla..

#21: Re: Spacers... Author: PaaN404040, Location: Putrajaya

Posted: Fri Sep 25, 2009 4:21 pm
----
owh...
ok thanks..

-> Car Talks & Chit Chat

All times are GMT + 8 Hours

Page 1 of 1