:: Forums ›

Deprecated: Assigning the return value of new by reference is deprecated in /home/idealogi/public_html/malatbimmer.com/evolution/includes/db/db.php on line 379
:: Forums › m20b25 intake elbow

-> MB Request

#1: m20b25 intake elbow Author: boonaroo,

Posted: Mon Apr 27, 2009 10:45 am
----
Folks,

does anyone have a spare m20b25 motronic intake elbow/bellow for sale? mine has started to develop cracks.

Boon

#2: Re: m20b25 intake elbow Author: evilnickwong, Location: TTDI, KL

Posted: Mon Apr 27, 2009 11:03 am
----
Don't reuse rubber, not safe. Laughing

#3: Re: m20b25 intake elbow Author: boonaroo,

Posted: Mon Apr 27, 2009 11:53 am
----
very true. though, the stockists are flat out and replacements will take weeks to ship. in the meantime, I'm seeing if there's one available to tie me over in case it keels over.

oh, FYI for anyone curious, a new one costs just below 200 bucks.

#4: Re: m20b25 intake elbow Author: evilnickwong, Location: TTDI, KL

Posted: Mon Apr 27, 2009 12:03 pm
----
The one I replaced on the E36 recently was RM150 I believe.

Btw, when that one broke, you can still bide time by sealing the cracks/holes. I used a combination of silicon sealant/epoxy and wrapped with duct tape after. Worked perfectly fine till I got the replacement. That's just temporary though of course lol.

#5: Re: m20b25 intake elbow Author: boonaroo,

Posted: Tue Apr 28, 2009 2:14 pm
----
to give some background of this request. I've been experiencing some unpleasant jerking from the intake, and after noticing cracks, I suspected it could be it. so it turns out that my mech (both of them) ascertained that its a busted AFM after a series of tests(the elbow tested ok, just outer cracks) and attempted remedies. which really is not the greatest as its not a cheap part.

#6: Re: m20b25 intake elbow Author: evilnickwong, Location: TTDI, KL

Posted: Tue Apr 28, 2009 3:32 pm
----
Is the flap sticky, or rather the movement is not smooth? If so, you can always give it a clean and lube it up.

If it's the electronics, then tough luck. Razz

#7: Re: m20b25 intake elbow Author: boonaroo,

Posted: Tue Apr 28, 2009 11:21 pm
----
nope....done the cleaning already. barn door works fine.

its the electronics and the sensor. boo-urns.

#8: Re: m20b25 intake elbow Author: wks79,

Posted: Mon May 04, 2009 2:21 pm
----
bro , rubber dont simply use 2nd hand one ..lol .
best to buy a new one . its wear & tear part.

#9: Re: m20b25 intake elbow Author: jo-e34, Location: sban

Posted: Mon May 04, 2009 2:31 pm
----
mind posting the pics of the elbow?
is it the one entering the throttle body?
i might just have the thing for you........

#10: Re: m20b25 intake elbow Author: highwaystar, Location: Kola Lompuer

Posted: Tue May 05, 2009 2:05 am
----

jo-e34 wrote:

mind posting the pics of the elbow?
is it the one entering the throttle body?
i might just have the thing for you........

you're right bro... thats the one lorr. go and get it boonaroo Laughing

#11: Re: m20b25 intake elbow Author: boonaroo,

Posted: Tue May 05, 2009 2:26 pm
----
yep. i'll look at it when I get down there.

#12: Re: m20b25 intake elbow Author: jo-e34, Location: sban

Posted: Wed May 06, 2009 8:07 am
----
sure do.....got my sms earlier?

-> MB Request

All times are GMT + 8 Hours

Page 1 of 1